oneConcept Launburg Bedienungsanleitung Seite 14

Step 1: open the battery compartments of the remote transmitters (loosen screw first) and
insert two batteries (type AAA) into each - according to the correct polarity as printed in the
compartment and depicted above).
Step 2: The mini switches are pre-set to those positions ensuring the
unobstructed transmission of data. IF for any reason the switches change
their position, please use the table below for re-setting the switches
to assign correct channels (and temperature unit) for each transmitter.
Please note: Changes will only come into effect when the batteries are
removed.
1
Down (=OFF)
Down (=OFF)
Down (=OFF)
Down (=OFF)
Up
Up
Up
Up
14
Overview & Setup
Outdoor Sensors
Mini Switch
2
Down (=OFF) Down (=OFF)
Down (=OFF)
Up Down (=OFF)
Up
Down (=OFF) Down (=OFF)
Down (=OFF)
Up Down (=OFF)
Up
3 4
Up
Up
Up
Up
Down (=OFF)
Up
Channel
= Channel 1
= Channel 2
= Channel 3
= Channel 4
= Channel 5
= Channel 6
= Channel 7
= Channel 8
= °F
= °C