Herunterladen Diese Seite drucken

TFA TRIO Bedienungsanleitung Seite 10

Funkthermometer

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TFA_No. 30.3062_Anleitung
21.07.2017
TRIO – Wireless thermometer
A 4:
Alarm symbol
A 5:
Arrow to mark the selected channel
Display section 3 IN for internal sensor and transmitters 3-8 (Fig. 1):
A 6:
Display IN for internal sensor and transmitters 3-8 (optional)
A 7:
Battery symbol
A 8:
Circle symbol for the automatically alternating channel
B: Buttons (Fig. 2):
B 1:
CLEAR/– button
B 2:
ALARM/SET button
B 3:
CHANNEL/+ button
C: Housing (Fig. 3):
C 1:
Wall mounting hole
C 2:
Stand (fold out)
C 3:
Battery compartment
5.2 Transmitter (Fig. 4):
D 1:
Transmission signal light
D 2:
Channel number
D 3:
Temperature
D 4:
Wall mounting hole
D 5:
Battery compartment
D 6:
Switches 1, 2, 3 and 4 (inside battery compartment)
D 7:
Sensor cable
6. Getting started
• Place the instruments on a table at a distance of about 1.5 meters from each other. Avoid being
close to possible sources of interference such as electronic devices and radio equipment.
18
10:24 Uhr
Seite 10
TRIO – Wireless thermometer
6.1 Installation of the transmitter
1. Open the screwed battery compartment of the first transmitter.
2. To set the first transmitter to channel 1, slide down the switches 1, 2 and 3.
3. To choose the temperature units display, slide the switch 4 up for °C (Celsius) or slide down
for °F (Fahrenheit).
4. Insert two new AAA 1.5 V batteries, polarity as illustrated. The measured temperature and the
channel number 1 appear on the display.
5. Close the battery compartment again.
• If you want to connect more transmitters, repeat steps 1 to 5. The correct switch position for
the transmitters 1-8 can be found on the table. 2 transmitters are included in this set, the base
station can support up to 8 transmitters (optional).
Switch
1
2
Down
Down
Down
Down
Down
Up
Down
Up
Up
Down
Up
Down
Up
Up
Up
Up
6.2 Installation of the base station
• Open the battery compartment of the base station and insert four new AAA 1.5V batteries,
polarity as illustrated.
• All segments will be displayed briefly.
• Close the battery compartment again.
Function
3
4
Down
Channel 1
Up
Channel 2
Down
Channel 3
Up
Channel 4
Down
Channel 5
Up
Channel 6
Down
Channel 7
Up
Channel 8
Down
°F
Up
°C
19

Werbung

loading

Diese Anleitung auch für:

30.3062