Abus TVAC71200 Bedienungsanleitung Seite 15

Explanation of symbols
The triangular high voltage symbol is used to warn of the risk of injury or health hazards (e.g.
caused by electric shock).
The triangular warning symbol indicates important notes in this user manual which must be
observed.
This symbol indicates special tips and notes on the operation of the device.
Important safety information
All guarantee claims are invalid in the event of damage caused by non-compliance with this
user manual. We cannot be held liable for resulting damage.
We cannot be held liable for material or personal damage caused by improper operation or
non-compliance with the safety information. All guarantee claims are void in such cases.
The following safety information and hazard notes are not only intended to protect your health, but
also to protect the device from damage. Please read the following points carefully:
•
There are no components inside the product that require servicing. Dismantling the product
invalidates the CE certification and the guarantee/warranty.
•
The product may be damaged if it is dropped, even from a low height.
Avoid the following adverse conditions during operation:
•
Extreme heat or cold
•
Direct sunlight
•
Dust or flammable gases, vapours or solvents
•
Strong vibrations
•
Strong magnetic fields (e.g. next to machines or loudspeakers)
General safety information:
•
Never look directly into the infra red spot light at short distances (within 1 m). Do not use any
optical device, such as a magnifying glass, to look directly at the spot light.
•
Do not leave packaging material lying around. Plastic bags, sheeting, polystyrene packaging, etc.
can pose a danger to children if played with.
•
Do not insert any objects into the device through the openings.
•
Only use replacement devices and accessories that are approved by the manufacturer. Do not
connect any non-compatible products.
•
Please pay attention to the safety information and user manuals for the other connected devices.
•
Check the device for damage before putting it into operation. If damage is identified, then do not
put the device into operation.
•
Adhere to the normal voltage limits specified in the technical data. Higher voltages could destroy
the device and pose a health risk (electric shock).
Unpacking the device
Handle the device with extreme care when unpacking it.
If the original packaging has been damaged, you must start by inspecting the device. If the device
shows signs of damage, return it in the original packaging and inform the delivery service.
15
English