Sd Card Slot - Axis Communications Q1635 Installationsanleitung

Color Indication
Red The image is out of focus.
Adjust the lens.
Amber The image is close to focus.
The lens needs fine tuning.
Green The image is in focus.
Buzzer signal for focus assistant
Buzzer
Fast interval
Medium interval
Slow interval
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the camera, see page 18.
Press and hold the function button (2) for more than two seconds to level the camera.
• When the camera is level, both LEDs are steady green, and the beep is continuous.
• When the camera is not level, the LEDs flash a combination of red, green and orange, and
the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the leveling is getting better.

SD card slot

NO NO TICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Disconnect power or unmount the SD card from the product's webpage before
removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
AXIS Q1635 Network Camera
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
17
EN