Grundig Cosmopolit 9 WEB DAB+ Bedienungsanleitung Seite 30

SETTINGS
Setting­DAB­stations
Automatic­station­search
If you first switch on the device in DAB mode, the
automatic station search starts.
During the search, the first line shows the num-
ber of stations found, and the second shows the
search scale.
After the end of the search, an alphanumeric ar-
rangement of stations appears. If no stations are
found, the DAB menu appears in the display.
1 Press »M« repeatedly until »DAB radio« ap-
pears on display.
– The device searches for DAB stations.
Note:
In the »DAB Radio« – »Scan« menu, you can
7
restart a new "Automatic station search".
This may be necessary when the location of
the device is changed.
Sorting­channels
You can sort the station list stored during the sta-
tion search in three different ways.
– »Alphanumeric«: all stations are sorted alpha-
numerically (default setting).
– »Ensemble«: all stations are sorted by ensem-
ble.
– »Valid«: active stations are listed first, stations
that are not active are shown with a question
mark.
1
Press »MENU« to open the DAB menu.
2
Select the option »Station order« by pressing »
« or » « and confirm by pressing »OK«.
3 Select your settings by pressing » « or » «
and confirm by pressing »OK«.
30­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
Setting­FM­stations
Setting­the­search­mode
There are two different automatic station search
modes.
1
Press »M« repeatedly until »FM radio« ap-
pears on display.
2 Press »MENU« to open the »FM« menu.
3 Select the option »Scan setting« by pressing
» « or » « and confirm by pressing »OK«.
– Display: »Strong stations only?«.
4
Select your setting (»YES« or »NO«) using » «
or » « and confirm by pressing »OK«.
5­Press »MENU« to end the setting.
Automatic­station­search
1
Press and hold » « or » «. When you re-
lease the button, the automatic search stops at
the next station.
Tuning­stations­manually
1 Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.
Saving­FM­radio­stations­on­presets
1
Search for the FM station as described.
2 To save stations, keep pressing the number but-
ton »1...0« until »Preset stored« appears in the
display.
– The stored station with a preset number then
appears in the display.
Note:
Button »0« is used for preset 10.
7
3
To store more stations, repeat steps 1 and 2 as
many times as necessary.