Grundig Cosmopolit 9 WEB DAB+ Bedienungsanleitung Seite 29

SETTINGS
Notes:­
If you wish to connect via a LAN cable, se-
7
lect the option »Wired« using » « or » «
and confirm by pressing »OK«.
The initial set-up is then finished.
If the connection to the router is via a
7
WLAN, there are two options, depending
on the router in use: If the router supports
[WPS], then continue operation from step
10/11 or step. 10/12.
If the router does not support [WPS], then
continue operation from step 13.
If the network name (SSID) is suppressed on
7
the WLAN router for security reasons, the
network cannot be found. It must then be en-
tered manually. Select the option »[Manual
config]« with »
V
to confirm. Continue with the chapter "Spe-
cial Settings" – "Registering the device ..."
(see "Long manual").
10 Select your wireless [WPS] network with » «
or » « and press »OK« to confirm.
Note:
There are two options for logging on to
7
a [WPS] network: using the push button
on the router or by entering a PIN on the
router.
11
Select the option »Push-Button« with» « or
» « and press »OK« to confirm.
Activate the »Push Button« function on the
router (menu or button) and press »OK« on
the device within 2 minutes.
– Display: »Please wait, connecting« and
then »Connected«.
End setting with »OK« on the device;
or
12
Select the option »PIN« with » « or » «
and press »OK« to confirm.
– Display: PIN number that specifies the de-
vice.
Enter the PIN number in the router menu and
confirm.
– Display: »Please wait, connecting« and then
»Connected«.
­ - --------------------------------------------------------------------------------------------------------------------------------------
« or » « and press »OK«
Λ
13 Select your wireless network (SSID) with » «
or » « and press »OK« to confirm.
– Key menu opens, the cursor is positioned in
the first input position.
Note:
If the network is encrypted, the network
7
key (security code WEP or WPA) must be
entered.
14 Enter your wireless security code:
Select the first character (capital and small
letters, numbers, symbols) with » «, » «, » «
or » « and press »OK« to confirm.
Repeat the procedure for all characters.
After you finish entering all characters, select
the push button »OK« with » «, » «, » « or
» « and press »OK« to confirm.
– The menu »Internet Setup« appears, the
network registration is processed.
– Display: »Please wait, Connecting« and
then »Connected«.
– After successful registration, the message
»Setup wizard completed« appears.
Notes:
You can choose between numbers, lower and
7
upper case letters, and special characters.
Press » « or » « to scroll through the menu
7
pages (numbers, letters, special characters,
etc.).
If you make a mistake during entry, press
7
» «, » «, » « or » « to select the push but-
ton »BKSP« and press »OK« to confirm. The
last character is deleted.
If you wish to exit the menu prematurely,
7
press » «, » «, » « or » « to select the
push button »CANCEL« and press »OK« to
confirm.
15
Press »OK« to end the setting.
29­
ENGLISH