Wiring Connection - Kenwood KDC-4057UB Bedienungsanleitung

Wiring connection

KDC - 4557U KDC - 3057UG
KDC - 4057UB KDC - 3057UR
KDC - 4057UR KDC - 3057URY
KDC - 3457UQ KDC - 317UR
Antenna terminal
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control wire/ Antenna control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
R L
Rear/subwoofer output
If no connections are made, do not let the wire come out from the tab.
STEERING WHEEL
KDC - 3457UQ
(Except for
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
ANT CONT
To the power control terminal when using the optional power amplifier, or to the antenna
control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone rings or during conversation.
(To connect the Kenwood navigation system, consult your navigation manual.)
MUTE
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Ignition wire
A7 (Red)
(Red)
Unit Vehicle
Battery wire A4 (Yellow)
(Yellow)
Default wiring
KDC - 3357UY
R L
Front output
KDC - 3257URY
Rear/subwoofer output
Fuse (10 A)
):
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
ª ·
B1 / B2 Purple / Purple/black
ª ·
B3 / B4 Gray / Gray/black
ª ·
B5 / B6 White / White/black
ª ·
B7 / B8 Green / Green/black
Part list for installation
A Faceplate
B Mounting sleeve
C Trim plate
D Wiring harness
E Extraction key
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
( ×1 )
( ×1 )
( ×1 )
( ×1 )
( ×2 )
ENGLISH | 13