Grundig MPAXX M-P 100 Servicehandbuch Seite 7

MP M-P100
AXX
PREPARATIONS
Inserting the batteries
1 Open both battery chambers on the rear side of the MP3 Player.
2
Insert the batteries (Mignon type, i.e. UM-3 or AA, 2 x 1.5 V).
Ensure correct polarity when inserting the batteries.
Inserting the MultiMediaCards/ROS Cards
1 Push card shaft covering to the left.
2
Insert the MultiMediaCards/ROS Cards with the bevelled side
forward into one of the two card shafts.
3 Close the card shaft cover.
Notes:
Do not apply any force when inserting the cards. Light pressure
is sufficient.
The MP3 Player recognises on its own whether one or two
cards have been inserted.
Mixed operation with one MultiMediaCard and one ROS Card
is also possible. The MP3 Player recognises the card title, when
one exists, and presents it in the display.
PLAYBACK
_______________________________________________
Index reverse/fast reverse
1 Briefly press »Y« during replay. The current music title starts
from the beginning.
The desired title (also when using two MultiMediaCards/ROS
Cards) can be selected through repeated brief pressing of
»Y« (reverse selection).
2 Switch on »Y« during playback through extended pressing of
automatic channel search. » Seek« appears in the display, and
the exact elapsed playing time of the title.
The headphones are muted.
Stop
1 Press »H« during playback.
Selecting the MultiMediaCards/ROS Cards
1 Press »H« during playback.
2
The playback between the MultiMediaCards/ROS Cards can be
changed back and forth through repeated pressing of »H«.
Switching off
1
Press »H« longer.
Note:
The MP3 Player shuts itself off when it is not used for longer
than 30 sec.
PLAYBACK
_______________________________________________
RA (repeat all)
As soon as the inserted MultiMediaCards/ROS Cards have been
played, the playback starts again from the beginning.
With »Y«, one switches the functions on (ON) and off (OFF).
RS (Repeat single)
The current music title is repeated indefinitely.
With »X«, one switches the functions on (ON) and off (OFF).
SH (Shuffle)
The titles are played back in random sequence.
With »Q«, one switches the functions on (ON) and off (OFF).
KL (Key Lock)
Locks the buttons against accidental pressing.
With »H«, one switches the functions on (ON) and off (OFF).
1 Leave the »Play Mode« menu with
The menu » Choose a Mode« appears. Leave the menu with
»ß « or select further menu functions using »Choose a Mode«,
see next page.
GRUNDIG Service
________________________________________
9
11
»ß «.
13
PLAYBACK
_______________________________________________
Switching on
1
Press »ß «.
The software status appears in the display, and after it the num-
ber and playing time of the title, for example »T04 07:53 «.
Playback/Pause
1 Press »Q«. Playback begins.
The name, the number (for example, T01) and the elapsed
playing time of the title appear in the display.
2
Press »Q« once again.
Playback is interrupted.
» PAUSE « appears in the display.
3 Press »Q« once again. Playback is resumed.
Index forward/fast forward
1 Briefly press »X« during replay. The next music title is selected.
The desired title (also when using two MultiMediaCards/ROS
Cards) can be selected through repeated brief pressing of
»X« (forward selection).
2
Switch on »X« during playback through extended pressing of
automatic channel search. » Seek« appears in the display, and
the exact elapsed playing time of the title.
The headphones are muted.
10
PLAYBACK
_______________________________________________
Additional Functions of Playback
1
Press »ß « during playback.
The menu » Choose a Mode « appears in the display.
The desired function is selected by pressing the corresponding
button under the abbreviation.
Choose a Mode:
PM IF DL TB BACK
P P M M (Play Mode)
You can select a variety of functions for the playback in the menu
»Play Mode«:
1
Press »Y«. The menu »Play Mode« appears in the display.
OFF OFF OFF OFF
RA RS SH KL BACK
2
Call up the desired function (see the following page).
12
PLAYBACK
_______________________________________________
I I F F (Information)
The bit rate of the current title appears in the display.
1
Press »X«. The bit rate is displayed,
for example » BR: 128000
2 Exit the menu with ȧ
» Choose a Mode «.
T T B B (Treble/Bass)
Treble and Bass can be changed.
1 Press »H«. The sound menu appears.
00 00
B- B+ T- T+ BACK
2 Set the basses with »Y« or »X«.
The setting range varies from » - 9« to »09«.
3
Set the trebles with »Q« or »H«.
The setting range varies from » - 9« to »09«.
4
Leave the menu with ȧ
»Choose a Mode«.
14
Allgemeiner Teil / General Section
Bit/s «.
« or select further menu functions using
« or select further menu functions using
1 - 7