Troubleshooting - Klarstein 10030713 Bedienungsanleitung

Problem
Wine cooler does not operate.
Temperature inside the wine
cooler is too warm.
Temperature inside the wine
cooler is too cold.
Vibrations.
Moisture forms on inside wine
cooler walls.
Moisture forms on outside of
appliance.
The door will not close properly.

Troubleshooting

Possuble Cause
Not plugged in.
The circuit breaker tripped or a blown fuse.
Temperature control is set too warm. Turn the control to a cooler
setting and allow several hours for the temperature to stabilize.
Door is kept open too long or is opened too frequently. Warm air
enters the wine cooler every time the door is opened. Open the door
less often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been disconnected for a period of time. 4
hours are required for the wine cooler to cool down completely.
Temperature control is set too cold. Turn the control to a warmer setting
and allow several hours for the temperature to stabilize.
Check to ensure that the wine cooler is on a level surface.
The wine cooler is touching the wall. Re-level the wine cooler and
move it from the wall. If continued vibration occurs, turn off the wine
cooler and unplug the power plug. Contact Customer Service Dept.
for further assistance.
Door is slightly open.
Door is kept open too long, or is opened too frequently. Open the
door less often.
The door is not sealed properly.
Door is slightly open, causing cold air from inside the wine cooler to
meet warm moist air from outside.
The wine cooler is not on a level surface.
The gasket is dirty.
16