Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-615-001.book Page 19 Wednesday, January 16, 2008 1:23 PM
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Plastic cap
2 Lock-on button for On/Off switch
(GST 120 BE)
3 On/Off switch
4 Handle
5 Thumbwheel for stroke rate preselection
6 Extraction adapter*
7 Vacuum connection*
8 Sliding shoe*
9 Base plate
10 Switch for sawdust blowing device
11 Adjusting lever for orbital action
12 Stroke rod
13 Guide roller
14 Saw blade*
15 Contact protector
16 Dust cover for vacuuming*
17 SDS clamping lever for saw blade release
18 Vacuum hose*
19 Splinter guard*
20 Scale for mitre angle
21 Thumbwheel for pre-tension of base plate
22 Base plate clamping lever
23 Lead for the parallel guide
24 Locking screw for parallel guide*
25 Parallel guide with circle cutter*
26 Centring tip of the parallel guide*
*The accessories illustrated or described are not in-
cluded as standard delivery.
1 609 929 N44 | (16.1.08)
English | 19
Werbung
Inhaltsverzeichnis
