Declaration Of Conformity - Bosch GEX 150 AVE Professional Originalbetriebsanleitung

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Assembly
Before any work on the machine itself, pull the mains plug.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding
sheets are available:
Material
– Paint
– Varnish
– Filling compound
– Filler
Expert for Wood
– All wooden materi-
als (e.g., hard-
wood, softwood,
chipboard, build-
ing board)
Best for Wood
– Hardwood
– Particle Board
– Building board
– Metal materials
Bosch Power Tools
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 26.01.2011
Application
For sanding off paint
For sanding primer (e.g., for removing brush
dashes, drops of paint and paint run)
For final sanding of primers before coating
For coarse-sanding, e.g. of rough, unplaned
beams and boards
For face sanding and planing small irregular-
ities
For finish and fine sanding of wood
English | 21
Dr. Eckerhard Strötgen
Head of Product
Certification
Grain size
coarse
medium
100
120
fine 180
240
320
400
coarse
medium
100
120
fine 180
240
320
400
2 609 932 777 | (23.2.11)
40
60
80
40
60
80