Herunterladen Inhalt Inhalt Diese Seite drucken

Product Description; Functionality And Method Of Operation - Rosenbauer RS 9 Betriebsanleitung

2-zyl.-4-takt-briggs & stratton vanguard benzinmotor, luftgekühlt, motorleistung 10,6 kw, nennleistung drehstrom 9 kva, nennstrom 11,6 a.
Vorschau ausblenden Andere Handbücher für RS 9:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Rosenbauer - Power generator RS 9
Cleaning
• The power generating set may not be cleaned during the operation or if the engine
is still hot.
Maintenance and repair
• Only the maintenance or repair procedures described in this manual may be
performed by the operating personnel.
• The power generating set may not be serviced during operation or if the engine is
still hot.
• All further maintenance or repair work may only be done by specially trained and
authorized service personnel.
• Always remove the spark plug connector before beginning maintenance or repair
work.
• The maintenance intervals stated in this manual must be adhered to.
Putting the power generating set out of service
• If the power generating set is not needed for more than 30 days it must be put out
of service.
• Store the power generating set in a dry and secured place.
• Prevent resinous residue in the fuel system with appropriate fuel additives.
Documentation
• One copy of the operation manual must be kept with the power generating set.
• The operation and service manual of the engine (Briggs & Stratton Corporation) is
an integral part of this operation manual.
Environmental Protection
• In order to protect the environment, the packaging material must be recycled
according to the regulations of the place of operation.
• The place of operation must be safeguarded against contamination by leaking
operating fluids.
• In order to protect the environment, used or remaining operating fluids must be
recycled according to the regulations of the place of operation.

4. Product description

4.1 Functionality and method of operation

Mobile power generating set for fire departments, compliant with DIN 14685
You have purchased a 3 phase device. Full output can only be taken off if all three
phases are subjected to equal load (400 V). You can draw one third of the rated output
per phase of 230 V consumers, if you only place the load on one phase.
The following applies when using extension leads or portable distribution networks:
Total length of network extension
56

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis