oneConcept 10030672 Anschluss- Und Anwendungshinweise Seite 17

Connect the telescopic tube to the flexible hose.
2. Power On
• Extract the AC power cord fully by holding the cord and pull it towards you. Do not pull
the cord by holding the plug. as this will damage the cord.
• Connect the plug to a suitable mains power outlet with the correct voltage. (Fig.6).
Before connect the plug to the power socket, unwind a sufficient length of cable. A
yellow mark on the power cable shows the ideal cable length. Don't expend the cable
beyond the red mark.
• Press firmly and turn on the main ON/OFF switch. One green indicator light will flash.
The machine is now on 'Standby' mode. At this stage , your machine is ready to work.
(Fig.7).
17