Installation - Solamagic S1 Montage- Und Gebrauchsanleitung

Important: do not open the connection module, all installation steps
are performed from outside
1. Pull the mains power lead out of the radiant heater.
2. Attach the connection module at the plug end of the radiator and secure
using 2-off M4x10 Allen screws and 2-off 4.3 mm serrated washers.
3. Insert the plug-in connector of the connection module in the panel
connector of the basic heater.
4. Plug the mains lead into the connection module and switch on the
power.

Installation

77
01/2015