Vestamatic UNI 12/22 Montage- Und Bedienungsanleitung Seite 44

83300911 G2.qxd 08.08.01
11. Sun response value, extend:
Manufacturer's default setting:
12. Sun response delay:
Manufacturer's default setting:
13. Sun response value, retract:
Manufacturer's default setting:
14. Sun reset delay:
Manufacturer's default setting:
15. Motor run time:
Manufacturer's default setting:
16. Reversing pulse:
Manufacturer's default setting:
17. Temperature triggered control:
Manufacturer's default setting:
18. Temperature reset delay:
Manufacturer's default setting:
19. Rain reset delay:
Manufacturer's default setting:
20. Programming hand-held transmitter
(only UNI 12 Funk / UNI 22 Funk)
Please read the chapter programming the radio transmitter for more infor-
mation.
14:31 Seite 87
Adjustable values and times
1 – 60 kLux
15 kLux
00:10 – 05:00 (min:sec)
02:30 (min:sec)
1 – 60 kLux
13 kLux
2 – 40 minutes
16 minutes
1 – 180 seconds
90 seconds
0 – 1.9 seconds
0 seconds
ON / OFF
ON
2 – 15 minutes
5 minutes
1 – 10 minutes
2 minutes
- 87 -
Adjustable values and times
Notes: If the sun triggered control (menu option 10) is de-
activated, menu options 11 to 14 will not be indi-
cated.
If the temperature triggered control (menu option 17)
is deactivated, menu option 18 will not be indicated.
Important: If you have purchased a UNI 22 sunshade control,
make sure to carry out all settings separately for
motor circuit 1 and 2, except time, background
illumination and contrast. The values that are
indicated and changed in the settings menu
apply only for the activated motor circuit.
If no button is pushed for 20 seconds, the display switches back
to the preset operating mode. The last indicated value will not be
saved.
In case of a power failure, all programmed parameters remain
stored.
G G
- 88 -