Vestamatic UNI 12/22 Montage- Und Bedienungsanleitung Seite 42

83300911 G2.qxd 08.08.01
9. Locking after 2 seconds:
Manufacturer's default setting:
OFF: After pushing the retract button, the sunshade will be
immediately retracted or extended.
ON: After pushing the retract or extend button for more
than 2 seconds, the sunshade will be fully retracted or
extended.
Pushing the retract or extend button for less than
2 seconds will retract or extend the sunshade only for
the duration of pushing the button.
That way, awning cloth and slat angle of the blind can
be accurately positioned.
10. Rain priority:
Manufacturer's default setting:
OFF: The safety functions rain and frost are deactivated in
the manual operation.
ON: The safety functions rain and frost are activated in the
manual operation.
11. Continuous up command:
Manufacturer's default setting:
OFF: A continuous signal at the up button input triggers an
up command at motor run time.
ON: A continuous signal at the up button input triggers an
continuous up command.
14:31 Seite 83
Basic settings
ON / OFF
OFF
ON / OFF
ON
ON / OFF
OFF
- 83 -
Basic settings
12. Continuous down command:
Manufacturer's default setting:
OFF: A continuous signal at the down button input triggers
a down command at motor run time.
ON: A continuous signal at the down button input triggers
a continuous down command.
13. Motor circuit 2 for roof window:
Manufacturer's default setting:
This menu option is only avalaible for UNI 22 / UNI 22 Funk.
OFF: Normal function for up and down button of motor
circuit 2.
ON: Up and down button for motor circuit 2 are inter-
changed.
14. Language:
Manufacturer's default setting:
Note: After having finished all tests, deactivate the test mode.
Continuous operation of the Vestamatic UNI 12/22 sun-
shade control in the test mode is not permissible.
G G
ON / OFF
OFF
ON / OFF
OFF
English / Dutch /
German / French
German
- 84 -