Lock Setting - Axair PH14 Bedienungsanleitung

Setting the timer
Automatic timer ON/OFF
Press the "Auto" button to switch the auto-
matic timer on or off.
Auto
The appliance can be operated as usual
in the automatic operating mode.
The fan speeds can be changed at will
R R
and the appliance can also be switched
on or off
P Auto Set rH%
neg Ions
However, the applince may not respond
to a button being pressed because the
automatic timer is active at that moment.
Try again about 2 minutes later.
At the next switching time, the automatic
timer again sets the value which you de-
termined when setting the switching time.
Reset
All switching times and the clock time
can be set to zero by pressing both "R"
buttons. The reference value for the air
humidity is set to 45 % at the same time.
Pressing the "Reset" buttons can remedy
malfunctions of the appliance control
system.
The reset function is not in operation
when you have lock the settings (see "Lock
setting").

Lock setting

You can lock the set switching times
against inadvertent change (see page
17).
26