Axair PH14 Bedienungsanleitung Seite 19

Maintenance
Fig. 1 Pull out the coarse dust filter or
Quattro filter.
Clean it with a vacuum cleaner if it is not
very dirty.
Replace the coarse dust filter or Quattro
filter if it is heavily contaminated.
Fig. 2 Tilt the housing.
Fig. 3 Withdraw the centrifuge from the
coupling in a straight line.
Clean the float switch (PH14: the safety
switch as well).
Fig. 4 Clean the centrifuge with the
supplied brush.
Make sure that the centrifuge engages
correctly when you reinsert it (Vibrations
can occur if it is not correctly located).
Fig. 5 PH14: Clean the evaporator
mat, droplet trap, mobile base cover
and mobile base.
Fig. 6 PH14A: Also clean the water
basin.
Clean the evaporator mat with luke-
warm water only. Use no cleaning
agents.
Clean the other components from time to
time (Figs. 5 and 6) with a decalcifying
agent or with vinegar.
Fig. 7 Clean the coarse filter with the
vacuum cleaner if it is not very dirty.
Fig. 8 Replace it if it is heavily contamin-
ed.
1
3
5
7
2
4
6
8
19