Axair PH14 Bedienungsanleitung Seite 20

Maintenance
Fig. 1 PH14A: Unscrew the strainer
housing and clean the strainer insert with
warm top water.
Fig. 2 When replacing the appliance
housing, take care that the level switch
cover on the Quattro filter slides past
freely.
Fig. 3 Locate the cross bar exactly in the
recess.
Note: Rinse the unit thoroughly after
extended periods of storage and after
deliming!
Additional maintenance for the
PH14(A)plus
Using a dry cloth, clean the ionization
needle each time you clean the appli-
ance.
Replace the needle after about one year
of operation. You can remove the nee-
dle straight out and insert a new one with
a pair of tweezers.
20
1
2 3