Product Description And Specifications; Intended Use; Product Features - Bosch UniversalInspect Originalbetriebsanleitung

OBJ_BUCH-3040-001.book Page 19 Monday, February 6, 2017 8:23 AM

Product Description and Specifications

Intended Use

The digital inspection camera is suitable for inspecting hard to reach locations or dark
areas. After mounting the provided accessories to the camera head, it is also suitable
for moving and removing small and light objects (e.g., small screws).
The digital inspection camera may not be used for medicinal purposes. It is also not
suitable for repairing pipe clogs or pulling in cables.
The light in the camera head is intended to illuminate the direct work area of the digital
inspection camera and is not suitable for household room illumination.

Product Features

The numbering of the product features refers to the illustration of the inspection cam-
era on the graphics page.
1 Gallery mode button
2 Photo mode/shutter release button
3 Button for rotating the image through 180°
4 On/Off button
Gallery mode: Button for starting the deletion process (2nd level)
5 Magnification (zoom) button (1st level)
Button for scrolling forwards through images or deleting an image (2nd level)
6 Brightness/black and white contrast button (1st level)
Button for scrolling backwards through images or stopping the deletion process
(2nd level)
7 Display
8 Camera cable
9 Hole for attaching accessories (2x)
10 Camera head
11 Illumination light in the camera head (4x)
12 Camera lens
13 Display in photo mode
14 Display in gallery mode
15 Serial number
16 Latch of battery lid
17 Battery lid
18 Slot for micro SD card
Bosch Power Tools
English | 19
1 609 92A 3HR | (6.2.17)