Technical Specifications - Bosch EKOM11 Installationsanleitung

14 en |
4

Technical specifications

Transmitter and receiver
Operating voltage
Permissible ripple
Operating current consumption at 12 V
Open-circuit current triggered at 12 V
Transmitter-receiver installation distance
Lateral installation offset
Distance to metal parts
Transmission frequencies
Alarm output
Max. switching performance
Transition resistance
Parallel capacity
Connection cable
Inner wire
Connection dimensions
Housing dimensions
Housing material
Color
Temperature range
Protection category
Resetting glass break sensors
Surface mounting housing for transmitter or receiver
Material
Dimensions (H x W x D)
Memory connection box
Current consumption at 12 V DC,
operating current
Current consumption at 12 V DC,
in alarm status
Cover contact
Alarm memory
Inputs
Material
Dimensions (H x W x D)
Environmental class
V1 | 2009.04
9 to 15 V DC
Max. 1.0 Vpp
Approx. 7 mA (max. 12 mA)
Max. 22 mA
Max. 10 mm
Max. 3 mm
Min. 5 mm
145 kHz and 290 kHz ± 5 kHz
Electronic switch
24 V DC, 200 mA, 300 mW
Approx. 5 Ohm
Approx. 10 nF
LIYY 6 x 0.14 mm², copper-plated;
Suitable for LSA insulation displacement
4 black, 1 red, 1 blue
∅ 3.8 mm,
(up to 10 m length permitted by VdS)
68 x 29.3 x 10 mm
ABS
White
-25 °C to +70 °C
VdS environmental class IV; IP 67
Brief removal of 12 V power (≥ 20 ms)
Plastic, SB or ABS
74 x 30.9 x 14.8 mm
Approx. 1 mA
Max. 6 mA
Normally open contact
With LED display
For memory activation or reset
and test function (status display)
Plastic, SB or ABS
85 x 85 x 26 mm
II according to VdS
Installation Manual
EKOM 11
Bosch Sicherheitssysteme GmbH