Technical Data; Product Features; Technical Drawing / Dimensions; Controller Connect / Disconnect - Kapego 843018 Bedienungsanleitung

Product-Notes
Manual
Article No.: 843018

7. Technical data

Power supply:
Power:
Protection class:
Signal:
Zones:
Working temperature:
Dimensions (LxWxH):
Weight:

8. Product Features

● 4 Zones
● 4 Programs
● Memory Funktion – KapegoLED Touchpanel RF White remembers the last brightness, speed
● and progamm off all zones after turn off.

9. Technical drawing / dimensions

10. Controller connect / disconnect

In order to connect the wall controller to the desired zone of an RF product, e.g. controller, Mixit set, RF Bulb
or RF-Fluters, switch on the power of the respective terminal and press the desired zone button on the wall
controller within one second. Upon successful pairing, the connected LED stripe / light flashes 3 times as
confirmation.
In order to disconnect the zone from the wall controller, switch on the power of the respective terminal and
press the desired zone button twice in quick succession within one second, while pressing and hold the button
for the second time. If the zone is successfully disconnected, the connected LED stripe will flash 9 times as
confirmation.
If the pairing / disconnecting process did not work within 5 seconds, please start from the beginning as above.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
220-240V AC/50-60Hz
2,00 W
IP20
Funk, 2,4 GHz
4 Chanels
-5°- 60°C
86,5 x 86,5 x 31,1 mm
70 g
12.04.2018
1 / 7