Mounting Instuction - Kapego 843018 Bedienungsanleitung

Product-Notes
Manual
Article No.: 843018

12. Mounting instuction

1. Mount an electrical box inside the wall.
Attention!
The touch panel can only be installed in a single box.
2. To separate the glass panel and the back cover of the controller
use a screwdriver along the gap of the back cover.
3. Mount the back cover on the Touchpanel RF Single with the 2 screws.
4. You need a 220-240V AC/50-60Hz power supply.
Connect the panel. Note the cable assignment:
N = blue • = yellow / green • L = brown
5. If you have made all connections,
press the glass panel on the back cover.
The product is CE compliant and meets all the essential requirements of Directive 2014/53/EU RED.
The CE Declaration of Conformity for this product can be obtained at the following address.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
https://shop.deko-light.com/
12.04.2018
1 / 7