Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(EN)
This device was designed to offer you the degree of safety expected
from personal protective equipment accordance with the Directive
89/686/EEC.
Important recommendations:
a)
Use of this product is feasible only in combination with other
parts of the total equipment needed. Therefore check carefully
whether the product is compatible with other parts/components
of the said equipment. Each of the components constituting the
system ought to have the relevant CE CERTIFICATE.
b)
Lifetime of this product will be extended if it is used with care.
In particular avoid rubbing against abrasive surfaces and/or
sharp edges.
SAFETY MEASURES AND WARNINGS
a)
There are innumerable and even unimaginable possible modes
of use of these devices. Only techniques shown in the figures
that are not crossed out or displaying a skull are recommended
and covered by the warranty.
b)
This product must be used exclusively by adequately skilled
persons otherwise the user must be constantly supervised by
trained personnel, who must guarantee for the safety. This in-
cludes liability against damages, injuries and death incurred by
improper use or misuse of the equipment.
c)
Do not hesitate to retire the device after a major fall or a major
impact. It may cause internal or invisible damage that may si-
gnificantly weaken its strength. In case of uncertainty treat the
device as damaged or consult SKYLOTEC.
d)
Regular periodical inspections should be carried out by an au-
thorised person at least once a year. For this purpose an ins-
pection record should be established (see the backside of these
instructions). Furthermore we would sincerely recommend one
set of equipment is used by one person only as its history of use
is best traced and understood in this way.
e)
The locking action of the device may be considerably reduced if
the device or the rope is dirty, oily, muddy or icy.
f)
Prolonged use in salty environments (e.g sea cliffs) may affect
the performance of the product.
g)
Do not expose the device to significant heat or cold (see work
and stock temperature).
h)
Avoid any contact with chemical reagents as they may affect
19
19
Werbung
Inhaltsverzeichnis
