Read First And Then; Scope Of Supply; Brief Description; Physical Installation - Camille Bauer SINEAX DME 440 Betriebsanleitung

Operating Instructions
Programmable multi-transducer SINEAX DME 440
Contents
1. Read first and then... ................................................. 28
2. Scope of supply .........................................................28
3. Brief description .........................................................28
4. Physical installation ....................................................28
4.1 Mounting on top-hat rails .....................................28
4.2 Fastening on a mounting surface .........................29
5. Electrical connections ................................................29
6. Connecting devices to the bus ..................................32
7. Commissioning ...........................................................34
7.1 Technical data ......................................................34
7.2 PC software for the SINEAX DME 440 .................37
8. Reconfiguring the analogue outputs ..........................38
8.1 Without hardware setting change ........................38
9. Notes of maintenance ................................................38
10. Releasing the transducer ...........................................38
11. Dimensional drawings ................................................38
12. Safety notes ...............................................................39
13. Instrument admission .................................................39
14. Declaration of conformity ...........................................40

1. Read first and then ...

The proper and safe operation of the device
assumes that the Operating Instructions
are read and the safety warnings given in
the sections

4. Physical installation

5. Electrical connections
7. Commissioning
12. Safety notes
are observed.
The device should only be handled by appropriately
trained personal who are familiar with it and authorized
to work in electrical installations.
Unauthorized repair or alteration of the unit invalidates
the warranty.
2. Scope of supply (Figs. 1, 2, 3 and 4)
Fig. 1
Betriebsanleitung
Programmierbarer Multi-Messumformer
SINEAX DME 440
Mode d'emploi
Convertisseur de mesure multiple
programmable SINEAX DME 440
Operating Instructions
Programmable multi-transducer
SINEAX DME 440
DME 440-1 B d-f-e 127 127 05.03
Camille Bauer AG
Aargauerstrasse 7
CH-5610 Wohlen/Switzerland
Telefon +41 56 618 21 11
Telefax +41 56 618 24 58
e-mail: info@camillebauer.com
Fig. 2
http://www.camillebauer.ch
28
15+ 16- 17+ 18-
A B
C 19+ 20- D 21+ 22-
RS485
1: 23 25
Tx+/Rx+ GND
2:
24 26
MODBUS Tx-/Rx-
000
3:
4:
Fig. 3
Definition MODBUS ® ® ® ® -Schnittstelle
DME401 / 440
Camille Bauer AG Jede unerlaubte Verwendung dieses
CH-5610 Wohlen Dokumentes wird gerichtlich verfolgt
Technische Änderungen vorbehalten !!
Inhaltsverzeichnis
1. Einführung
2. Anschliessen der Geräte an den Bus
3. Realisation der Schnittstelle
3.1 Konfiguration der Schnittstelle
3.2 Prinzip der Übertragung
3.3 Allgemeine Form der Telegramme
3.4 Berechnung des Prüfwortes (CRC16)
3.5 Spezielle Datentypen
4. Auslesen von Messwerten
4.1 Messgrössen
4.2 Messwerttabellen
4.3 Optimierte Datenübertragung
4.4 Beispiele für die Messwerterfassung
4.5 Alternative Messwertverarbeitung in MODBUS-Tools
5. Aktuelle Zählerstände
6. Rücksetzen von Schleppzeigern
7. Konfiguration des Messumformers
8. Fehlermeldungen
Änderung Datum Vis.: Type: DME401 / 440 Nr.: 1/36 gez.: 15.02.99 RR
2001-039 22.11.01 RR Bezeichnung: Definition MODBUS ® ® ® ® -Schnittstelle 134 081 d/e
Zeichnr.: Fig. 4
Transducer (Fig. 1)
1 Operating Instructions (Fig. 2) in three languages: Ger-
man, French, English
1 blank type label (Fig. 3), for recording programmed set-
tings
1 Interface definition DME 440 (Fig. 4)

3. Brief description

SINEAX DME 440 is a programmable transducer with a
RS 485 bus interface (MODBUS
variables of an electrical power system simultaneously and
generates 4 proportional analogue output signals.
The RS 485 interface enables the user to determine the
number of variables to be supervised (up to the maximum
available). The levels of all internal energy meters that have
been configured (max. 4) can also viewed. Provision is made
for programming the SINEAX DME 440 via the bus. A standard
EIA 485 interface can be used.
The transducers are also equipped with an RS 232 serial
interface to which a PC with the corresponding software can
be connected for programming or accessing and executing
useful ancillary functions. This interface is needed for bus
operation to configure the device address, the Baud rate and
possibly increasing the telegram waiting time (if the master
is too slow) defined in the MODBUS
The usual methods of connection, the types of measured
variables, their ratings, the transfer characteristic for each
output and the type of internal energy meters are the main
parameters that can be programmed.
The ancillary functions include a power system check, pro-
vision for displaying the measured variable on a PC monitor,
the simulation of the outputs for test purposes and a facility
for printing nameplates.
4. Physical installation
The transducer can be mounted either on a top-hat rail or
directly onto a wall or mounting surface.
Note "Environmental conditions" in Section
"7.1 Technical data" when determining the place
of installation!

4.1 Mounting on top-hat rails

Simply clip the device onto the top-hat rail (EN 50 022) (see
Fig. 5).
). It supervises several
®
protocol.
®
Fig. 5. Mounting on top-hat rail
35 × 15 or 35 × 7.5 mm.