auna Harmonica Anschluss- Und Anwendungshinweise Seite 16

To cancel the Alarm when it has activated. Press the Alarm button. Tune and press TUNE/SELECT
knob to choose ALARM 1 or ALARM 2 you would like the cancel, then select the Alarm State to OFF.
Using the aux input
Connect the AUX connect wire (not included) from the out jack of your Personal Player such as
portable MP3 player to the AUX input jack.
Press the DAB/FM/AUX button to select AUX mode,
Turn on your Personal Player to begin playing, adjust the volume to desire listening level.
Menu
During the Standby mode, press and hold the MENU button for 3 seconds.
1. Set Clock: Tune the tuner knob and press to manual setting the clock
2. MCU version: This showing the version of this model's software
3. Setup the ErP: Tune the tuner knob and press to enable and disable the ErP function. After having
enabled the ErP function, the unit will be turned off in 15 minutes when the speaker is playing no
sound. After disabling the ErP function, the unit will not be turned off and long time playing.
EQ
There are 4 EQ sound for your choosing by pressing EQ button: Pop, Rock, Classic, Flat
Sleep
You may setup a sleep timer by pressing Sleep button: 120, 90, 60, 30, off
E.g. If you choose 120, means the unit will be off automatically after playing 120 minutes.
Mute
Press MUTE button to mute the unit.
To RESET the product
Press and hold the INFO button while in DAB mode, then you will see "Press Enter key to reset". Press
"Tune/Select" to reset the radio.
16