Operation - auna Harmonica Anschluss- Und Anwendungshinweise

Operation

Power supply
Operating the unit on AC power
Insert one end at the supplied power cord to the DC 9V IN Jack located at the rear of the unit and the
other end into the Wall outlet. When the First time used the cord has to be firmly pushed into the
socket if does not work on AC, to try again to be sure for a positive connection.
Power on
Press the Standby button to turn the unit.
DAB mode
Press the DAB/FM/AUX button to select DAB radio mode
Auto select : Press the SCAN button, "AUTOTUNE FULL SCAN" will show on the display, and the
number of DAB station will shown on the upper right corner, and it will automatically play the first
station. Tune the TUNE/SELECT knob to choose the next or previous station.
Manual select: Press and hold the TUNE/SELECT knob until the "MANUAL TUNE" icon shown on the
display, then tune the TUNE/SELECT knob to choose the station
Note : you many have to wait for the unit to tune in to the new channel.
DAB radio stations presetting
To receive the desired DAB station, press and hold the PRESET button, "Empty P1" (P1 is the current
program number) will appear on the display, the current program number "P1" is flashing on the
display.
Tune the TUNE/SELECT knob to choose your desired program number (1-20) you want stored to. Then
press TUNE/SELECT knob to store it.
Repeat the same procedures until all the desired radio stations were stored into the program list.
Recall the memory, press PRESET button and tune the TUNE/SELECT knob to select the stored radio
station as desired. Press the TUNE/SELECT knob to confirm.
FM radio
Press the DAB/FM/AUX/BT button to select FM radio mode, press the SCAN button, when a radio is
found, the frequency on display will stop running and start playback automatically.
If reception is no good, tune the TUNE/SELECT knob to fine tune. FM radio presetting is same as DAB
radio presetting.
INFO Button
The UNIT has DAB information modes which are shown on the bottom line of the display. Short press
the INFO key to see the available types:
1. Program type: Displays the type of station content being broadcast e.g. Classic, Pop, News, etc.
14