Operation - auna Peggy Sue 10027037 Anschluss- Und Anwendungshinweise

• Use the supplied USB cable and the AC/DC adaptor to connect the device to a household mains supply
or connect to your PC with the USB cable.
• Place a record on the platter. Do not forget the puck when playing 45-RPM-singles.
• Select the suitable speed with the RPM switch.
• Turn the VOL/POWER knob clockwise to turn the device on and - at the same time - adjust the volume.
• Use the lever (5) to raise the tone arm and lead it towards the outer grooves of the record. The player
starts rotating the record.
• Use the lever to lower the tone arm until the stylus runs on the record groove.
• Enjoy some music.
• When a record ends, the record player automatically stops - as long as the auto stop switch is set to
„ON". When it is set to OFF, the player keeps on rotating the record until the tone arm is manually
taken off the record.
• Use the stylus cover when the record player is not in use.
Thanks to the integrated stereo speakers, you can use the PeggySue to listen to your records on the move.
For listening at your home stereo, use the backward RCA jacks to connect the player to the AUX IN of your
amplifier.
Use the supplied USB cable to connect your record player to your computer. With the supplied software
"Audacity" you can use the USB port of your computer as an input source and convert your favourite records
to MP3 files.
Please take detailed notes on how to record from the "Audacity" help file.
10

Operation

Basics
Connections
Convert your LPs to MP3/Wav