Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Chapter 2
Front & rear panel
Front Panel overview
Front panel description
Function rotary dial (FUNCTION):
The function rotary dial allows to switch the device between Tuner, CD or USB & SD/MMC
operation mode by pressing a short term. It will switch between the several modes in this
sequence. By rotating this dial, the output volume for the 'Variable audio output' can be
adjusted.
By pressing and holding this button, the playback mode will be switched between 'Single
Play' and 'Normal Play' mode. In 'Normal play' mode, the next track will automatically
start playing when the current track is finished. In 'Single play' mode, the player will fall
into stop mode after the current track being finished, waiting for a 'Play' command (press
the Play button) before playing the next track. In situations where the device is used for
music, usually the 'Normal Play' mode will be desirable, while in other situations such as
educational purposes, houses of worships or gym's the 'Single Play' mode can provide
great user convenience.
LCD Display:
The LCD Display shows the current operation mode of the unit. It shows which radio
station is playing, which audio track is playing, which functions are enabled, ...
CD Slot:
Audio CD's shall be inserted into this drive. The drive will load the CD automatically when
it is inserted into this slot. Only use CD's with normal round shape and with normal size
(12 cm). Always check if the CD slot is empty before inserting a CD and don't force the
CD into the slot when it doesn't accept the CD automatically. When a CD is inserted, the
device will automatically start playing it.
CD Eject button (EJECT):
This button shall be pressed to remove the CD from the drive. After this button being
pressed, the CD will be ejected from the drive and can be taken out by the user. If the CD
is not taken within ~10 seconds, the CD will be automatically inserted to the drive again.
8
Werbung
Kapitel
Inhaltsverzeichnis
