AUDAC CMP30 Bedienungs- Und Installationsanleitung Seite 10

Press & Hold: By pressing and holding this button, the position in the currently playing
track can be selected (forward). After the button is released the track will resume to play
from this point.
• Tuner mode:
In tuner mode, the desired radio station can be selected with this button.
Press: By pressing this button one single time, the next radio station will be searched
in auto seek mode, and when used in manual seek mode the selected frequency will
increase one step.
Press & Hold: By pressing and holding this button, the selection mode for the tuner will be
switched to manual seek mode and the frequency can be increased by holding / pressing
this button. It will resume automatically to auto seek mode after about ~3 seconds.
Repeat (REP):
• CD, USB & SD/MMC mode:
With this button, the repeat mode can be selected between Repeat One (Repeats
currently playing track), Repeat Folder (Repeats all tracks in currently playing folder),
Repeat All (Repeats all tracks on inserted data carrier) and Repeat Off (Stops playing
after all tracks are played once) in this sequence. Press this button to toggle between the
different repeat modes.
• Tuner mode:
Press & Hold: By pressing and holding this button, the current chosen radio frequency will
be stored on 'Position 3' of the selected band.
Band select for the tuner (BAND):
• Tuner mode:
Press this button to select between the different tuner bands. The different tuner bands
are FM1 / FM2 / FM3 / MW1 / MW2 and will be selected in this sequence.
• CD, USB & SD/MMC mode:
Press this button to display the information of the ID3 tag of the current track.
(Folder / File / Title / Artist / Album)
Press & Hold: By pressing and holding this button, the loudness can be switched On and
Off.
Equalizer select (Flat / Classic / Pop / Rock / Off ) (EQ):
Press this button to switch between different equalizer presets: Flat / Classic / Pop / Rock
/ Off. They will be selected in this sequence.
Search down (DIR -):
• CD, USB & SD/MMC mode:
Press this button to jump to a lower folder.
• Tuner mode:
Press: Press this button in tuner mode to select the previous programmed radio preset.
Press & Hold: By pressing and holding this button, the current chosen radio frequency will
be stored on 'Position 5' of the selected band.
10