Functions Overview - AUDAC CMP30 Bedienungs- Und Installationsanleitung

Search up (DIR +):
• CD, USB & SD/MMC mode:
Press this button to jump to a higher folder.
• Tuner mode:
Press: Press this button in tuner mode to select the next programmed radio preset.
Press & Hold: By pressing and holding this button, the current chosen radio frequency will
be stored on 'Position 6' of the selected band.
Random play (RAND):
• CD, USB & SD/MMC mode:
Press this button to switch the random play mode (Shuffle) On and Off. When random play
is switched ON, tracks will be played in a random sequence.
• Tuner mode:
Press & Hold: By pressing and holding this button, the current chosen radio frequency will
be stored on 'Position 4' of the selected band.
Memory for the tuner frequency (MEMO):
When pressing this button, available radio stations will be searched and automatically
stored to the preset memory. The radio stations are stored in order of increasing
frequency, starting from Band 1 - Position 1 with subsequently the increasing frequencies
on the higher positions.
Manual position assignment of the preset frequencies can also be done by pressing and
holding the PLAY/PAUSE(1) – STOP(2) – REP(3) – RAND(4) – DIR-(5) – DIR+(6) buttons.
Mute (MUTE):
By pressing this button, the variable output and fixed CD/MP3 output can be muted /
unmuted. The fixed tuner output is not affected by the mute button. When the outputs are
muted, the message 'MUTE' will blink on the display.
USB connection port & SD/MMC card slot:
An USB storage device and/or an SD/MMC memory card can be inserted to these slots.
Tracks stored on here can be played through the CMP30 and it will automatically start to
play when the medium is inserted.
Power switch:
The device can be switched ON and Off using the power switch. When the device
is switched ON, the blue LED above the power button will illuminate. After powering
on, it takes about three seconds before the device being operational. The device will
automatically resume to its previous operation mode upon power on.

Functions overview

The CMP30 contains many buttons having different functions depending of the current
operation mode of the device and the way they are operated. For example, some buttons
have a different function in CD/MP3 mode or tuner mode, also depending if they are
pressed for a short term or pressed and hold for a few seconds.
Below table gives an overview for all the different functions which can be controlled,
indicating the differences between the different operation modes.
11