Herunterladen Inhalt Inhalt Diese Seite drucken

Chapter 3 Quick Start Guide - AUDAC CMP30 Bedienungs- Und Installationsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Chapter 3
Quick start guide
The CMP30 player is designed for installation into a rack (482 mm / 19") with a height
of one single rack space (44.45 mm), but it can also be placed as a desktop unit. Before
using the device, the connections of the CMP30 should be made properly. The audio
output connections should be made with the RCA/Cinch connectors on the rear side of the
device. depending of the application, the variable either the fixed Audio outputs (or both)
should be used.
When the device is connected to a sound system where only one audio source will be
used at a time, the variable audio output should be used. When connecting the CMP30 to
a Multi-Channel amplifier or Pre-amplifier or when used in a Multi-Zone audio Matrix
system, its recommended to use the fixed audio outputs, so both CD/MP3 and Tuner
audio sources can be used simultaneous. After the audio connections are made, the
mains power should be connected to the IEC input connector and the FM antenna should
be connected to the provided connectors.
After all connections are made properly, the device can be switched on by pushing the
power button. After the power button is pressed, the device will start working after some
seconds.
To start playing music from CD/MP3, insert a CD, USB storage device or SD/MMC
memory card to the slots on front of the device. When the media is inserted, the device
will detect automatically and will start playing. You can select the playing tracks using the
control buttons on front of the device. For switching to settings of another media source,
press the function dial on front (The variable audio output will switch automatically to this
media source).
The preferred radio station can be selected by pressing the
and
buttons. When pressing those buttons one time, it will search automatically to the
previous or next radio station. When holding one of those buttons for three seconds, it will
return to manual seek mode and you can select the radio station manual.
14

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis