Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
Werbung
Kapitel
Inhaltsverzeichnis
Inhaltszusammenfassung für AUDAC CMP30
- Seite 1 CMP30 User Manual www.audac.eu...
-
Seite 3: Inhaltsverzeichnis
Index Introduction Precautions Safety requirements Caution servicing EC Declaration of Conformity Waste of Electrical and Electronic Equipment (WEEE) Caution Class 1 laser product Chapter 1: Pin connections and connectors Connection standards Chapter 2: Front & rear panel Front panel overview Front panel description Functions overview Rear panel overview... -
Seite 4: Introduction
Introduction Digital audio source - CD, MP3 & Tuner The CMP30 is an All-In-One audio source device which accommodates three different kinds of audio sources into one single device. It combines a CD-Player, MP3-player and AM/FM tuner into one single rack space 19” housing. On the front side is a CD slot, an USB slot and a SD/MMC memory card slot provided. This makes it possible to play regular audio CD’s as well as MP3 files from either CD’s, USB memory sticks or SD/MMC memory cards. On the rear side of the device are three stereo outputs provided. Two of them are dedicated to the tuner and CD/MP3 function, while the third output is a variable output. Because of the two separate stereo outputs, the tuner and CD/MP3 player can operate simultaneously. This feature can be useful for applications such as Multi-Zone systems where multiple audio sources are required at the same time. The variable output has a volume control function and carries the signal from the CD/MP3 player when a track is playing, but when the CD/MP3 has ended, the variable output will automatically switch to tuner function. -
Seite 5: Precautions
Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE. DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS. DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS. DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE EARTHING CONNECTION CAUTION - SERVICING This product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to) EC DECLARATION OF CONFORMITY This product conforms to all the essential requirements and further relevant specifications described in following directives: 2004/108/EC (EMC) and 2006/95/EC (LVD) -
Seite 6: Waste Of Electrical And Electronic Equipment (Weee)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) The WEEE marking indicates that this product should not be disposed with regular houshold waste at the end of its working life. This regulation is created to prevent any possible harm to the environment or human health. This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose this product to your local collection point or recycling centre for electrical and electronic waste. This will make to sure that it will be recycled on an environmentally friendly manner, and will help to protect the environment in which we all live. CAUTION The symbols shown are internationally recognized symbols that warn about potentional hazards of electrical products. The lightning flash with arrowpoint in an equilateral triangle means that the unit contains dangerous voltages. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the users manual. These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. Disconnect the unit during storms to prevent damage. CLASS 1 LASER PRODUCT This product is equipped with an optical unit containing a Class 1 laser. Improper use can result in hazardous radiation exposure. This product should not be adjusted or repaired by anyone except properly qualified service personnel. -
Seite 7: Chapter 1: Pin Connections And Connectors
Chapter 1 Pin connections and connectors CONNECTION STANDARDS The in- and output connections for AUDAC audio equipment are performed corresponding to international wiring standards for professional audio equipment. Cinch (RCA): For unbalanced output connections: Tip: Signal Sleeve: Ground White: Left Red: Right... -
Seite 8: Chapter 2 Front & Rear Panel
Chapter 2 Front & rear panel Front Panel overview Front panel description Function rotary dial (FUNCTION): The function rotary dial allows to switch the device between Tuner, CD or USB & SD/MMC operation mode by pressing a short term. It will switch between the several modes in this sequence. By rotating this dial, the output volume for the ‘Variable audio output’ can be adjusted. By pressing and holding this button, the playback mode will be switched between ‘Single Play’ and ‘Normal Play’ mode. In ‘Normal play’ mode, the next track will automatically start playing when the current track is finished. In ‘Single play’ mode, the player will fall into stop mode after the current track being finished, waiting for a ‘Play’ command (press the Play button) before playing the next track. In situations where the device is used for music, usually the ‘Normal Play’ mode will be desirable, while in other situations such as educational purposes, houses of worships or gym’s the ‘Single Play’ mode can provide great user convenience. LCD Display: The LCD Display shows the current operation mode of the unit. It shows which radio station is playing, which audio track is playing, which functions are enabled, … CD Slot: Audio CD’s shall be inserted into this drive. The drive will load the CD automatically when it is inserted into this slot. Only use CD’s with normal round shape and with normal size (12 cm). Always check if the CD slot is empty before inserting a CD and don’t force the CD into the slot when it doesn’t accept the CD automatically. When a CD is inserted, the device will automatically start playing it. CD Eject button (EJECT): This button shall be pressed to remove the CD from the drive. After this button being pressed, the CD will be ejected from the drive and can be taken out by the user. If the CD... - Seite 9 Play / Pause button (PLAY/PAUSE): • CD, USB & SD/MMC mode: Press: The music from the CD or USB & SD/MMC can be started and paused with this button. When a track currently is playing, it will be paused after pressing this button and the current position (Track no and time) will be shown on the display. It will resume to play after pressing this button again. • Tuner mode: Press & Hold: By pressing and holding this button, the current chosen radio frequency will be stored on ‘Position 1’ of the selected band. Stop button (STOP): • CD, USB & SD/MMC mode: The currently playing track will be stopped when pressing this button. After pressing ‘Play’ again, it will resume to play at the absolute beginning of the inserted data carrier. • Tuner mode: Press & Hold: By pressing and holding this button, the current chosen radio frequency will be stored on ‘Position 2’ of the selected band. Tuning down / CD-Mp3 Track selection down ( • CD, USB & SD/MMC mode: In CD or USB & SD/MMC mode, the playing track and position in the track can be selected with this button. Press: By pressing this button for a short term, the previous track will be selected Press & Hold: By pressing and holding this button, the position in the currently playing track can be selected (backwards). After the button is released the track will resume to play from this point. • Tuner mode: In tuner mode, the desired radio station can be selected with this button. Press: By pressing this button one single time, the previous radio station will be searched in auto seek mode, and when used in manual seek mode the selected frequency will decrease one step.
- Seite 10 Press & Hold: By pressing and holding this button, the position in the currently playing track can be selected (forward). After the button is released the track will resume to play from this point. • Tuner mode: In tuner mode, the desired radio station can be selected with this button. Press: By pressing this button one single time, the next radio station will be searched in auto seek mode, and when used in manual seek mode the selected frequency will increase one step. Press & Hold: By pressing and holding this button, the selection mode for the tuner will be switched to manual seek mode and the frequency can be increased by holding / pressing this button. It will resume automatically to auto seek mode after about ~3 seconds. Repeat (REP): • CD, USB & SD/MMC mode: With this button, the repeat mode can be selected between Repeat One (Repeats currently playing track), Repeat Folder (Repeats all tracks in currently playing folder), Repeat All (Repeats all tracks on inserted data carrier) and Repeat Off (Stops playing after all tracks are played once) in this sequence. Press this button to toggle between the different repeat modes. • Tuner mode: Press & Hold: By pressing and holding this button, the current chosen radio frequency will be stored on ‘Position 3’ of the selected band. Band select for the tuner (BAND): • Tuner mode: Press this button to select between the different tuner bands. The different tuner bands are FM1 / FM2 / FM3 / MW1 / MW2 and will be selected in this sequence. • CD, USB & SD/MMC mode: Press this button to display the information of the ID3 tag of the current track. (Folder / File / Title / Artist / Album) Press & Hold: By pressing and holding this button, the loudness can be switched On and Off.
-
Seite 11: Functions Overview
Memory for the tuner frequency (MEMO): When pressing this button, available radio stations will be searched and automatically stored to the preset memory. The radio stations are stored in order of increasing frequency, starting from Band 1 - Position 1 with subsequently the increasing frequencies on the higher positions. Manual position assignment of the preset frequencies can also be done by pressing and holding the PLAY/PAUSE(1) – STOP(2) – REP(3) – RAND(4) – DIR-(5) – DIR+(6) buttons. Mute (MUTE): By pressing this button, the variable output and fixed CD/MP3 output can be muted / unmuted. The fixed tuner output is not affected by the mute button. When the outputs are muted, the message ‘MUTE’ will blink on the display. USB connection port & SD/MMC card slot: An USB storage device and/or an SD/MMC memory card can be inserted to these slots. Tracks stored on here can be played through the CMP30 and it will automatically start to play when the medium is inserted. Power switch: The device can be switched ON and Off using the power switch. When the device is switched ON, the blue LED above the power button will illuminate. After powering on, it takes about three seconds before the device being operational. The device will automatically resume to its previous operation mode upon power on. Functions overview The CMP30 contains many buttons having different functions depending of the current operation mode of the device and the way they are operated. For example, some buttons have a different function in CD/MP3 mode or tuner mode, also depending if they are pressed for a short term or pressed and hold for a few seconds. Below table gives an overview for all the different functions which can be controlled,... - Seite 12 Control Operation mode Action Function Function rotary dial All modes Press Change between Tuner / CD / SD/MMC Operation mode All modes Rotate Change output volume for variable output All modes Press & Hold Change playback mode between single play and normal play CD Eject button All modes Press Remove inserted CD’s from the CD Drive Play/Pause button CD, USB & SD/MMC Press Pause & Resume to play the current track Tuner Press & Hold Store current chosen radio frequency on Position 1 Stop button CD, USB & SD/MMC Press Stop to play the current track Tuner Press & Hold Store current chosen radio frequency on Position 2 Rewind button CD, USB & SD/MMC Press Select previous track CD, USB & SD/MMC Press & Hold Scan back position in currently playing track Tuner Press Find previous radio station in Auto seek mode / decrease...
-
Seite 13: Rear Panel Overview
Rear Panel overview Rear panel description Power inlet: The mains power supply (110~240V AC / 50~60 Hz) has to be applied to this AC power inlet. The connection is made by an IEC C14 power connector which is fitted with a fuse. When replacing the fuse, make sure that the value of the replacement fuse matches the value of the original fuse. (T500mAL/250V) RS232 control port: The RS232 control port can be used for controlling the device through external hardware such as audiovisual installations, home & industrial automation systems, computers, ... The complete commands list for controlling the CMP30 through RS232 can be downloaded from the AUDAC website. Variable audio output CD/MP3/Tuner: The variable audio output can be switched between CD/MP3 or tuner mode and the output level (volume) can be adjusted. The selection and volume adjustment should be done using the rotary function dial. In most basic audio application where only one simultaneous source is required (either CD/MP3 or tuner), the variable audio output will be used. Fixed audio output CD/MP3: The signal on this output is dedicated to the CD/MP3 player, and has a constant line output level (the volume is not adjustable). This output can be used for audio applications where multiple sources are simultaneously used (CD/MP3 and tuner), such as Multi-Zone audio applications. Fixed Audio Output Tuner: The signal on this output is dedicated to the tuner, and has a constant line output level (the volume is not adjustable). This output can be used for audio applications where... -
Seite 14: Chapter 3 Quick Start Guide
Chapter 3 Quick start guide The CMP30 player is designed for installation into a rack (482 mm / 19”) with a height of one single rack space (44.45 mm), but it can also be placed as a desktop unit. Before using the device, the connections of the CMP30 should be made properly. The audio output connections should be made with the RCA/Cinch connectors on the rear side of the device. depending of the application, the variable either the fixed Audio outputs (or both) should be used. When the device is connected to a sound system where only one audio source will be used at a time, the variable audio output should be used. When connecting the CMP30 to a Multi-Channel amplifier or Pre-amplifier or when used in a Multi-Zone audio Matrix system, its recommended to use the fixed audio outputs, so both CD/MP3 and Tuner audio sources can be used simultaneous. After the audio connections are made, the mains power should be connected to the IEC input connector and the FM antenna should be connected to the provided connectors. After all connections are made properly, the device can be switched on by pushing the power button. After the power button is pressed, the device will start working after some seconds. To start playing music from CD/MP3, insert a CD, USB storage device or SD/MMC memory card to the slots on front of the device. When the media is inserted, the device will detect automatically and will start playing. You can select the playing tracks using the control buttons on front of the device. For switching to settings of another media source, press the function dial on front (The variable audio output will switch automatically to this media source). The preferred radio station can be selected by pressing the and buttons. When pressing those buttons one time, it will search automatically to the previous or next radio station. When holding one of those buttons for three seconds, it will return to manual seek mode and you can select the radio station manual. -
Seite 15: Chapter 4: Additional Information
Chapter 4 Additional information Technical specifications Inputs Audio compact disk slot (12 cm) USB Memory stick input SD/MMC Memory card input Control Front panel RS232 Outputs 2 x Fixed audio output (Tuner & CD/MP3) 1 x Variable audio output (Selectable) Frequency range 87.5 ~ 108 MHz 522 ~ 1620 kHz Channel step 50 kHz 9 kHz Intermediate frequency 10.7 MHz 455 kHz Sensitivity 2 µV at 30 dB S/N 30 dB Signal to noise ratio > 60 dB > 50 dB CD/MP3 > 80 dB Frequency response 20 Hz - 20 kHz Audio codec MPEG 1/2/5 Layer 2/3 decoding (8 kHz - 48 kHz) MWA V4, V7, V8, V9 (L1, L2) decoding (8 kHz - 48 kHz) MP3/WMA compatible media SD/MMC Memory cards (up to 16 GB / FAT32) USB Media (up to 16 GB / FAT32) Output level Fixed output... -
Seite 16: Notes
Notes... - Seite 17 CMP30 Digitale Audioquelle AUDAC PROFESSIONAL AUDIO EQUIPMENT CMP30 Digitale Audioquelle – CD-Player, MP3-Player und Tuner Bedienungs- und Installationsanleitung...
- Seite 18 AUDAC PROFESSIONAL AUDIO EQUIPMENT Bedienungs- und Installationsanleitung AUDAC http://www.audac.eu info@audac.eu...
- Seite 19 Inhalt EINLEITUNG ............................................3 AUFSTELLUNG............................................4 SICHERHEITSHINWEISE ........................................5 VORSICHT – WARTUNG ........................................5 ÜBERBLICK FRONTBLENDE UND GERÄTERÜCKSEITE ............................6 BEDIENELEMENTE FRONTBLENDE ..................................... 6 FRONTBLENDE FUNKTIONSBESCHREIBUNG ................................6 ANSCHLÜSSE GERÄTERÜCKSEITE ....................................11 GERÄTERÜCKSEITE FUNKTIONSBESCHREIBUNG ..............................11 BEDIENUNGSHINWEISE ......................................... 13 ZUSÄTZLICHE INFORMATIONEN ....................................14 TECHNISCHE SPEZIFIKATIONEN ....................................
-
Seite 20: Einleitung
Einleitung Dieser Abschnitt gibt einen kurzen Überblick über die Ausstattungsmerkmale des CMP30 CMP30 ist eine All-In-One-Audioquelle, die drei verschiedene Audiogeräte in sich vereint. Es ist eine Kombination aus CD-Player, MP3-Player und UKW/MW-Tuner in einem 1U 19-Zoll-Gehäuse. Auf der Frontblende befinden sich das CD-Laufwerk, ein USB-Port und ein SD/MMC- Kartenleser. -
Seite 21: Aufstellung
Kapitel Aufstellung Bauen Sie das Gerät nicht in einem Bücherregal oder Schrank ein, es sei denn, es ist für ausreichende Ventilation gesorgt. Stellen Sie das Gerät nicht in einer staubigen, feuchten oder vibrierenden Umgebung auf. Benutzen Sie das Gerät nicht in unmittelbarer Nähe von Wasser. Verschütten Sie keine Flüssigkeiten auf dem Gerät. -
Seite 22: Sicherheitshinweise
Sicherheitshinweise Behandeln Sie das Gerät stets vorsichtig. Schließen Sie das Gerät nur an einer geerdeten Steckdose an. Dieses Gerät ist kein Spielzeug. Lassen Sie Kinder nicht mit dem Gerät spielen. Führen Sie keine Fremdkörper in das Gerät ein. Zur Vermeidung von Stromschlag öffnen Sie das Gerät nicht. VORSICHT - WARTUNG In dem Gerät befinden sich keine vom Verbraucher wartbaren Teile. -
Seite 23: Überblick Frontblende Und Geräterückseite
Kapitel Überblick Frontblende und Geräterückseite Bedienelemente Frontblende Funktionsbeschreibung 1. Funktionsumschalter (FUNCTION): Der Funktionsumschalter ist ein Drehknopf, der auch gedrückt werden kann. Mit Druck schalten Sie zwischen Tuner-, CD- und USB/SD/MMC-Betrieb um. Mit Drehung stellen Sie die Lautstärke des „variablen Audioausgangs“ ein. 2. - Seite 24 5. Wiedergabe/Pause (PLAY/PAUSE): • CD-, USB/SD/MMC-Betriebsmodus: Mit Tastendruck starten und unterbrechen Sie die Wiedergabe von CDs oder USB/SD/ MMC-Speichermedien. Mit dem ersten Tastendruck starten Sie die Wiedergabe, mit dem zweiten Tastendruck wird die Wiedergabe unterbrochen. Mit erneutem Tastendruck setzen Sie die Wiedergabe von gleicher Stelle aus fort. •...
- Seite 25 • Tunermodus: Im Tunermodus stellen Sie den gewünschten Sender ein. Taste gedrückt halten: Umschalten zur manuellen Sendersuche; das Gerät kehrt nach drei Sekunden zur automatischen Sendersuche zurück. Taste kurz drücken: Mit kurzem Tastendruck gehen Sie in der manuellen Sendersuche jeweils einen Frequenzschritt abwärts. Drücken Sie keine Taste, so schaltet das Gerät nach drei Sekunden zur automatischen Sendersuche zurück.
- Seite 26 Der aktuelle Sender wird im „Senderspeicher 4“ des gewählten Frequenzbandes gespeichert. 15. Senderspeicher (MEMO): Mit Tastendruck startet der CMP30 die Suche nach verfügbaren Radiosendern und speichert sie automatisch in den Senderspeichern. Die Sender werden mit aufsteigender Frequenz gespeichert, beginnend mit Band 1 - Position 1.
- Seite 27 16. Stummschaltung (MUTE): Mit Tastendruck wird der variable Ausgang stummgeschaltet und „MUTE” blinkt im LCD- Display. 17. USB-Port Schließen Sie Ihr USB-Speichermedium zur Wiedergabe gespeicherter MP3-Dateien am USB-Port an. 18. SD/MMC-Kartenleser Stecken Sie Ihre SD/MMC-Speicherkarte zur Wiedergabe gespeicherter MP3-Dateien am Kartenleser an.
-
Seite 28: Anschlüsse Geräterückseite
Sicherung nur gegen eine gleichwertige Sicherung aus (T500 mA/250 V). 2. RS232-Port: Der RS232-Port dient der Steuerung des CMP30 über externe Hardware wie Heimautomation oder Computer. Schließen Sie Ihre externe Steuerungs-Hardware hier an. Die vollständigen Anleitungen zur RS232-Steuerung laden Sie bitte von der AUDAC- Website herunter. - Seite 29 5. Audioausgang Tuner: Das Signal auf diesem Ausgang kommt vom Tuner und hat einen konstanten Line- Ausgangspegel (Lautstärke ist nicht einstellbar). Benutzen Sie diesen Ausgang, wenn Sie mehrere Signalquellen (CD/MP3 und Tuner) gleichzeitig benutzen (z.B. Multi-Zonen- Anwendung). 6. UKW-Antenne: Schließen Sie hier die mitgelieferte UKW-Antenne für besseren Empfang an.
-
Seite 30: Bedienungshinweise
Kapitel Bedienungshinweise Der CMP30-Player ist zur Installation in einem Rack konzipiert (482 mm/19”), er ist einen Rackeinsatz (1U; 44,45 mm) hoch. Das Gerät kann ebenfalls freistehend benutzt werden. Nehmen Sie vor der Benutzung alle Anschlüsse vor. Die Audioanschlüsse erfolgen mit RCA/Cinch-Steckern auf der Geräterückseite. -
Seite 31: Zusätzliche Informationen
Kapitel Zusätzliche Informationen CMP30 Technische Spezifikationen CMP30 Ausstattungsmerkmale Audio-Compact-Disc-Einzug (12 cm) Eingänge USB-Stick SD/MMC-Kartenleser Front panel Steuerung RS232 2 x dedizierter Audioausgang Ausgänge (Tuner und CD/MP3-Player) 1 x variabler Audioausgang (umschaltbar) Leistung 87.5 ~108.0 Mhz Frequenzbereich 522 ~1620 kHz 50 kHz... -
Seite 32: Notizen
Notizen...