English - Braun 4126 Handbuch

English

Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy the new Braun
appliance.
Read all use instructions thoroughly before
using this product.
Important
• This appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children. Switch
off the appliance and disconnect from
supply before changing accessories
or approaching parts that move in use.
• This appliance can be used by per-
sons with reduced physical, sensory
or mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
• Always disconnect the appliance from
the supply if it is left unattended and
before assembling, disassembling or
cleaning.
• This appliance is designed for normal
household use only.
• Your voltage must correspond to the
voltage printed on the type plate
located on the bottom of the power
base. Connect to AC (~) only. When
connecting to an outlet, the motor
must always be turned off (rotary
switch (i) at «O»).
• The Blades are very sharp, handle
carefully.
• Do not grab into the jug while the lid is
open – risk of injury by the knife.
• The appliance works only if the jug is
correctly assembled on the power
base.
• Before switching on, make sure the
jug is properly assembled and in place
on the power base with the lid (incl.
measuring cup).
2231001IBR_JB5160_S4-70.indd 7
• Do not use the device without any
load in the jug.
• Allow hot liquids to cool off before
pouring it into the jug.
• Braun electric appliances meet appli-
cable safety standards. Repairs or the
replacement of the mains cord must
only be done by authorised service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
• During first usages under heavier
load, the appliance can emit some
smell. This is a normal occurrence and
does not mean any technical defect.
• Be careful if hot liquid is poured into
the food processor or blender as it
can be ejected out of the appliance
due to a sudden steaming.
Description
a Measuring cup
b Lid
c Lid gasket
d Jug
e Blade gasket
f Blade unit with fastener ring
g Power base
h Start button
i Rotary switch
j Cord storage
Max. processing capacity: 1.6 litres
Prior to use
• Clean all parts before using the jug blender for
the fi rst time (see paragraph «Cleaning»).
• Uncoil amount of cord needed from cord storage
at the bottom of the power base and connect to
an outlet.
Jug assembly
• Carefully place the blade into the fastener ring.
• Position the blade gasket onto the rim of the
blade unit.
• Screw the jug securely clockwise into the
fastener ring until limit is contacted.
Attaching the jug
• Make sure that the rotary switch is in the «O»
position.
7
17.06.14 16:20