Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GSS 140-1 A Professional Originalbetriebsanleitung

OBJ_BUCH-2247-003.book Page 12 Tuesday, September 27, 2016 3:54 PM
12 | English
Safety Warnings for Sander
 Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Technical Data

Orbital sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
– square
— Adhesion via Velcro backing
— Attachment via clamping
– rectangular
— Adhesion via Velcro backing
– triangular
— Adhesion via Velcro backing
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 609 92A 368 | (27.9.16)

Intended Use

The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Dust box, complete (Microfilter System)
3 Square base plate (GSS 140-1 A/
GSS 160-1 A Multi)
4 Rectangular base plate (GSS 160-1 A/
GSS 160-1 A Multi)
5 Triangular base plate (GSS 160-1 A Multi)
6 Sanding plate
7 Handle (insulated gripping surface)
8 Screws for base plate (4x)
9 Sanding sheet*
10 Rear clamping bracket
11 Sanding-sheet clamps (2x)
12 Front clamping bracket
13 Perforating tool*
14 Extraction outlet
15 Filter element (Microfilter System)
16 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GSS 140-1 A GSS 160-1 A
3 601 BA2 1.. 3 601 BA2 2..
W 180
-1
min 12000
-1
min 24000
mm 1.6
mm 115 x 107
mm 115 x 140
mm –
mm –
GSS 160-1 A Multi
3 601 BA2 2..
180 180
12000 12000
24000 24000
1.6 1.6
– 115 x 107
– 115 x 140
133 x 80 133 x 80
– 150 x 100
Bosch Power Tools