Kärcher MV 5 Originalbetriebsanleitung Seite 19


Position 0: The appliance is
switched off. Electric tool is sup-
plied with voltage.
Machine socket
Note: Observe the maximum connect-
ed load (see Chapter "Technical da-
ta").
Illustration

To connect an electric tool.
Blowing connection
Illustration

Connect the suction hose to the
blower connection, this will activate
the blower function.
Filter cleaning button
Illustration

For cleaning the flat pleated filter fit-
ted.
Note: Do not operate the button when
the flat pleated filter is wet.
Recessed grip

After unlocking it, grab the appli-
ance head by the handle recess
and remove it.
Carry handle
Illustration

The carrying handle is also used to
lock the appliance head and the
container. To unlock, push the bow
all the way forward until you clear
the lock.

Grab the appliance head by the
handle recess and remove it.
Accessory compartment, appli-
ance head

The accessory compartment allows
the storage of suction nozzles on
the appliance.
Illustration
Note: This accessory compartment is
required in addition to the application
of the integrated filter cleaning system.
Filter box and release key
Illustration
Illustration
H

In order to clean the filter, press the
release key, fold out and remove
the filter box.
Accessory mount
Illustration

The accessories compartment al-
lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Cable hook
Illustration

To store the mains cable.
Parking position
Illustration

To rest the floor nozzle during work
interruptions.
Steering roller
Illustration

Turn the container, press in the
steering roller in the openings at the
base of the container till the end-
point.
Drain screw
Illustration

The drain screw is used to quickly
and comfortably empty wastewater
in the container. Tilt the container
forward for easier emptying.
EN
– 8
2
19