Replacing 3-Stage Filter Cartridges; Replacing Pre-Filters - AL-KO PURE Bedienungsanleitung

en
15.3

Replacing 3-stage filter cartridges

1
Removing 3-stage filter cartridges
1. Pull out the operating unit from the top.
Fold the operating unit to the side.
2. Pull out the filter using the available handle.
Inserting 3-stage filter cartridges
1. Insert the filter cartridge.
The three spacers of the filter cartridge must lock into the notches of the machine.
The filter cartridge can only be locked into one position.
2. Re-insert the operating element into the machine from the top.
The operating element can only be completely locked into one position.
The machine can only be turned on when the filter and operating element are completely locked
into place.
15.4

Replacing pre-filters

Two pre-filters are arranged around the machine base.
1
2
Removing the pre-filter
1. Press the pre-filter clip in the direction of the machine base.
2. Pull out the operating unit from the bottom.
46
1 Operating unit
2
2 Spacer
3
1 Pre-filter
1
2
AL-KO PURE
3 3-stage filter cart-
ridge
2 Clip
3400857_a