Measuring The Air Quality; Manually Adjusting The Air Quality Sensor - AL-KO PURE Bedienungsanleitung

Operation
14.7

Measuring the air quality

Press the Air Quality button to measure the air quality.
The air quality will be displayed via the LED ring after approx. 10 seconds.
The display shows "--"
Display of the air quality
Display
Red
Yellow
Green
14.8

Manually adjusting the air quality sensor

2
3
The air quality sensor adjusts automatically to the available air quality. This adjustment may take a con-
siderable time. The automatic system can be manually set to good air quality to accelerate the process.
1. Press the Air Quality button to manually adjust the air quality sensor.
2. While the air quality display is shown press both the "+" and "-" buttons at the same time.
The air quality is manually adjusted and set to green. The display shows "CA".
Translation of the original operating instructions
2
h
Test
Service 1
Meaning
Poor air quality
Average air quality
Good air quality
1
h
Test
4
Service
1 Air Quality button
1 Display
2 "-" button
2 LED ring
3 "+" button
4 Air Quality button
43