AL-KO PURE Bedienungsanleitung Seite 39

Operation
Display
Notifications on the display Meaning
"0"
"1 - 5"
"AU"
Fan levels
Fan level
1-2
3
4
5
AU
Setting fan levels
You can set up to five fan levels as well as automatic mode "AU".
Selecting the fan level
Selecting automatic
mode
A sensor evaluates the air quality once the machine is turned on.
After the air quality evaluation, the automatic fan system adjusts the machine automatically. This
process can take up to 2 minutes.
When the machine is first put into operation, it takes approx. 48 hours before the automatic fan
system has been run-in for the general control scope.
Turning the fan on/off
Turning the fan off
Turning on the fan
Translation of the original operating instructions
Fan level 0. The fan is switched off.
Fan level 1 - 5 is set.
Automatic mode is set.
Operating mode
Ultra-quiet continual operation during the
night
Continual operation during the day
Continual operation during the day
High-speed operation
Automatic mode
Press the "+" button to increase the fan level. Press and hold the "+"
button to increase the fan level automatically.
Press the "-" button to decrease the fan level. Press and hold the "-" but-
ton to decrease the fan level automatically.
Press the "+" button until "AU" for automatic mode is shown on the dis-
play.
Press the fan button twice in succession to turn off the fan.
Press the fan button twice in succession to turn the fan on.
The fan will be set to the level last set.
Application example
Bedroom
Smaller rooms approx. 25 m
Larger rooms approx. 60 m
Fast air purification or for extremely conta-
minated air.
In automatic mode, the fan speed adjusts
itself to the contamination level determined
by the sensor.
2
2
39