Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.Heat-preserving Function
a. Press ON/OFF button first, the indicator will lit up and flicker,
then press up/down button to arrive the setting temperature,
press KEEP WARM, the indicator will not flicker, the heating
tube will start to work, arrive the setting temperature, the
boiling indicator off (which next S ON/OFF button), the
indicator next KEEP WARM button will flicker, also the tube,
keep 30 minutes, then power off.
b. Press up/down first, after arrived, press KEEP WARM, the
next indicator will lit up, then press ON/OFF button, the next
indicator will lit up and flicker, heating tube will start to work
( when the actual temperature lower than setting), after
arrived, the boiling indicator off (next ON/OFF), the indicator
next KEEP WARM off)
c. Press up/down first, after arrived, press KEEP WARM, the
next indicator will lit up, then press ON/OFF button, the
indicator next KEEP WARM flicker, heating tube not work
(when the actual temperature higher than setting), after the
water cold to setting, tube flicker, keep 30 minutes, then
power off.
10.Please sure the cover is closed enough, in case the hot
steam will to handle.
11.When boiling, do not open the cover, in case the steam will
scald you.
12.Put on the base
(1). After Inject the water, please put the kettle on the base, to
sure the connector is fine.
(2).The button to " start", the power indicator will lit up, the kettle
will start to heating
(3)Auto-off after boiling
After boiling, the heating stop work (the indicator stop flicker),
the power off after 10 seconds.
(4) Reuse
If want to continuous use or re-boiling, it should be let the control
a little cold, then press the power button.
Werbung
