ATTACHING GUY ROPES
5
Fasten the tent feet of the second tent to the
ground using the water- or sandbags.
Tip: If you want to set up the Fusion Panel
without any wrinkles, you need to increase the
tension between the tents, perhaps using the
guy ropes provided.
ATTACHING GUY ROPES
In order to secure the tent against wind loads,
it is necessary to fasten it with guy ropes.
Keep the angle relatively small, so that the
point of fastening is as far as possible from
the tent foot.
The highest level of stability is attained when
the guy ropes are aligned with the diagonally
opposite tent feet.
(Stakes are not included)
EN
25