GYBE EVENT TENT Aufbauanleitung Seite 19

SETTING UP YOUR EVENT TENT
4
The strut takes its final form on its own
once the air is rushing in. Roll out the
remaining strut as indicated in the illustration.
As before, check that all deflation valves
are closed.
6
Roll out the last remaining strut and make sure
that all deflation valves are closed. Pump up the
strut through the inflation valve at the end of the foot.
8
5
Fill the unrolled strut using the inflation
valve at the end of the foot.
It can be found on the underside.
7
Soon the tent will begin to stand up by itself.
With some gentle lifting, the tent will be
guided to its final form.
Now you can attach the guy ropes (page 11),
side panels (page 8),
and water- or sandbags (page 9) as needed.
EN
19