Side Panels - GYBE EVENT TENT Aufbauanleitung

SETTING UP YOUR HUMANITY TENT
5
Attach the compressed air hose to the
inflation valve.
Regardless of the speed of inflation, the tent
will begin to stand up by itself.
6
With some gentle lifting, the tent will be
guided to its final form.
Be sure not to let the internal pressure of the
strut exceed 6 psi (0.4 bar).
Tip: The ideal pressure for the strut is
between 4 and 5 psi (0.25 and 0.35 bar).
7
Now you can attach the guy ropes (page 11),
side panels (page 8),
and water- or sandbags (page 9) as needed.
EN
21