Instructions For Use / Safety Warnings; Care Instructions - GYBE EVENT TENT Aufbauanleitung

INSTRUCTIONS FOR USE AND SAFETY WARNINGS
Keep the tent away from sources of fire and heat.
1
Never place a source of heat directly under the roof.
Warning: The materials can melt at high temperatures.
While using the tent outdoors, always be sure to keep it sufficiently fastened.
2
Warning: The tent can catch wind even without having the side panels in place.
With winds in excess of 13 mph, water- and sandbags do not offer sufficient weight.
Tent pegs or stakes must be used. (Stakes are not included)
In order to prevent the tent from being moved by gusts of wind,
3
place at least one side panel on the wall facing the wind.
That way the wind won't be able to enter the tent.

CARE INSTRUCTIONS

Never store the tent when it is wet.
1
Be sure the tent is stored dry between 32 - 90° F.
Remove larger pieces of dry debris from the tent feet,
2
preferably with a fine hand broom or a wet cloth.
Debris with sharp edges may damage the tent fabric.
Both the tent roof and the side panels should be cleaned only with clear water
3
or with highly diluted cleaning agent. Always handle printed side panels with care.
In case of doubt, check on an inconspicuous part if a cleaning agent is aggressive to the tent surface.
WARNING
Tent materials are water resistant and flame retardant because of special coatings.
Harsh scrubbing or cleaning agent with solvents destroy these coatings!
GYBE accepts no liability for mal- or non-function of improperly handled GYBE products.
EN
17