Electrical Safety; Device-Specific Safety Instructions - Kaleas 43010 Bedienungsanleitung

CarDVR ENGLISH
! Observe the safety instructions, guidelines, occupational safety and
accident prevention regulations as well as protection policies applica-
ble to your job and workplace.

Electrical safety

 Do not operate the device in a damp or wet environment.
 Remove the battery if the device will not be used for an extended period.
! Utilize only batteries, power packs and system voltage intended for
use in this specific device. Otherwise, the device may pose a fire haz-
ard.
Only use the charging cable supplied as this cable transforms the on-
!
board voltage from 12 ... 24 V to 5.5 V!

Device-specific safety instructions

! Use the device and related accessories only according to the intended
use as well these instructions.
! Before using, check the device for possible damage. Do not use it if
the safety is in doubt.
 Ensure the device is protected when storing it and out of the reach of
children.
 Protect the device against moisture, corrosive substances, direct sun-
light, extreme temperatures and wide temperature fluctuations.
 Avoid heavy vibrations or jolts, and never drop the device or use force.
 Keep the device away from electromagnetic sources such as induction
heating and electrical welding devices. Avoid static charges since these
may damage the device.
 Avoid accidentally switching on the device. Make sure it is switched off
when inserting batteries.
 Do not block openings on the device.
© KALEAS GmbH & Co. KG
29