Modes; Video Recordings; Image Recording; Playback - Kaleas 43010 Bedienungsanleitung

CarDVR ENGLISH

Modes

You can change between the different modes by pressing the button
MODE .
If the device is already displaying a video, the mode cannot be changed.
You must first end the recording by pressing the button OK .

Video recordings

Video sequences are recorded in the selected settings. The device is al-
ways in this mode when it is switched on and recording begins auto-
matically.
By pressing the button OK a video sequence can be ended manually
(stop) or a new sequence can be started (record). The button will flash
blue during the recording and the length of the recording will be dis-
played (hh:mm:ss). If the recording has been ended manually, the de-
vice will display the remaining storage capacity in hh:mm:ss.

Image recording

Individual images may be recorded. Activate image recording by press-
ing the button OK .
The device will display the remaining storage capacity as a number of
possible recordings.

Playback

The device will display the most recent recording either as a freeze
frame, the last video sequence or the last image recording. The sequen-
tial number of the recording is also displayed.
In the case of a video sequence, the symbol is also overlaid and the
length of the video is displayed in hh:mm:ss. You can start and stop the
playback of a video by pressing the button OK .
It is possible to change between recordings using the butons DOWN
and UP . You can display and navigate within miniature views of the
recordings, delete individual recordings and adjust the volume of the
video playback using the button MENU .
23
© KALEAS GmbH & Co. KG