Saving Recordings; Settings; Video Recordings - Kaleas 43010 Bedienungsanleitung

Saving recordings

In order to save videos or images for future reference, connect the de-
vice to a computer using the USB cable provided. The CarDVR is consid-
ered as a storage medium from which the recordings can be trans-
ferred.
Alternatively you can remove the SD card and read it using a suitable
reading device (card slot).

Settings

Different user-specific settings can be used with the Kaleas CarDVR
which are explained below.
The different menus can be accessed by pressing the button MENU
You can navigate through the menu entries using the buttons DOWN
and UP . Select the menu entries using the button OK
confirm your selection. By pressing the button MENU
reach the next menu or leave the settings.
Begin by selecting the mode for which you would like to adjust the set-
tings.

Video recordings

Video rec (video recording)
Resolution
Time stamp
MotionDetect
AudioRecord
CycleRecord
24
VGA 640 x 480 Pixel
D1 720 x 480 Pixel
SXGA 1280 x 960 Pixel
FHD 1920 x 1080 Pixel
Off
Date only Overlay a time stamp in the recording.
Date&Time
Off
The recording begins automatically
when a movement is recognised.
On
On
The recording begins with or without
audi (sound).
Off
2 min
The recoding length of an individual
video sequence Each sequence is saved
5 min
CarDVR ENGLISH
and
again you will
© KALEAS GmbH & Co. KG
.