Wolf BML-EXCELLENT Bedienungs-, Wartungs- Und Montageanleitung Seite 23

requisites for using the control unit BML Excellent. See ap-
pendix 1 for an overview and explanation.
Warning! The user can (seriously) injure himself or
seriously damage the product. A warning is indicative
of a risk of damage to the user or product, if the user
does not execute the procedures carefully.
Careful! The product can be endangered. "Careful"
is indicative of a risk of damage to the product, if the
user does not execute the procedures carefully.
A remark with supplementary information
possible problems.
Name:
Model/Type:
Electricity
Power consumption:
Protection class:
Power reserve:
Ambient temperature:
Storage temperature:
Humidity:
Other:
The control unit BML Excellent should be placed and used in
a space with the correct ambient conditions for proper opera-
tion. The control unit BML Excellent may only be mounted on
the indoors, but not on the vicinity of a heat source, a radia-
tor, in a draft or in a humid environment. The control unit BML
Excellent may also not be exposed to direct radiation heat
(sun light).
The control unit BML Excellent may also not be mounted in
components.
The control unit BML Excellent has a number of buttons with
which the appliance can be operated:
Right-hand setting knob
1
Return key
2
Appliance selection button
3
Manual operation button
4
Info key
5
Left-hand setting knob
6
Art.-Nr.: 30 63 420
Control unit BML Excellent
Wolf GmbH
15 to 24 Volt
3 Watt
IP30
> 48 hours
0 °C to 50 °C
-20 °C to 60 °C
10% to 90%
Exclusively for indoor use
- The Left-hand setting knob
marking left beside the display have no function in
this type of control unit BML Excellent.
Flow rate indicator
1
Ebus indicator
2
Fan indicator
3
Fault symbol
4
Filter message
5
Current time block
6
Current day
7
Appliance selection
8
Current date and time
9
The control unit BML Excellent has four ventilation modes.
yourself (for more information see paragraph 4.7).
(see ).
Warning! The installation and assembly activi-
ties required to commission your control unit BML
Excellent should be performed by an installer
approved by Wolf GmbH.
Warning! Immediately remove the power from your
control unit BML Excellent by removing the connect-
Parts of the control unit BML Excellent lie open, are
pierced or had fallen hard;
The power cable is damaged;
The screen is cracked or broken.
Then contact Wolf GmbH or you supplier.
Never use parts other than original parts.
Only use the control unit BML Excellent
indoors, at temperatures between 0 °C and 50 °C and
with a relative humidity between 10% and 90%.
will be lost if the control unit BML Excellent breaks
down or if the factory settings are reset. There is no
backup available.
Assembly and installation should be per-
formed by an installer approved by Wolf GmbH. The
following requirements should be taken into account
during placement:
and the
6
-
5
23