Manual ISDN telephone adapter
3 Do you have an ISDN house installation?
You can continue using your existing ISDN house installation with the ISDN
telephone adapter. For information on adapting the installation contact our
partner company Dipl. Ing. Fust under 0848 559 111 or your own electrician/
telecommunications engineer.
Only for technical personnel
The existing sockets in a house installation can continue in use if you remove
the ISDN-NT device from the U and S interfaces. The ISDN-S0 interface of the
ISDN telephone adapter can be directly connected to the ISDN-S0 bus of the
house installation. The two S0 interfaces of the ISDN telephone adapter are
terminated with 100 ohm. If there is a cabling for analog telephones you can
directly connect the analog port of the modem to the analog socket of the
house installation. It is important to ensure that there is no connection to the U
interface.
53