Enabling/Disabling Switching Via Mouse - G&D TradeSwitch4-USB Installation Und Bedienung

Enabling/disabling switching via mouse

If the console mouse is a Microsoft »IntelliMouse Explorer« or a compatible 5-key
mouse of another manufacturer, the mouse can be used to switch between channels.
The switching by mouse is disabled in the defaults. Use the setup menu to enable or
disable the function and choose between the following options:
Use the mouse to switch to the previous or the next channel.
 Single:
Access the previous or the next channel - or several channels - by mouse.
 Multiple:
 No: Switching by mouse is disabled.
How to enable/disable switching by mouse:
NOTE: Use the setup menu to enable/disable switching by mouse.
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
3. Press the
Space

No
 Single
 Multiple
4. Press the S key to save your settings.
or Arrow keys to select
key (repeatedly) to choose between the following options:
Select Channel via Mouse
G&D TradeSwitch4-USB · 28
Configuration
.